/* * Interactive disassembler (IDA). * Zilog Z8 module * */ #ifndef __INSTRS_HPP #define __INSTRS_HPP extern instruc_t Instructions[]; enum nameNum { Z8_null = 0, // Unknown Operation Z8_adc, // Add with carry Z8_add, // Add Z8_and, // Logical AND Z8_call, // Call procedure Z8_ccf, // Complement carry flag Z8_clr, // Clear Z8_com, // Complement Z8_cp, // Compare Z8_da, // Decimal adjust Z8_dec, // Decrement Z8_decw, // Decrement word Z8_di, // Disable interrupts Z8_djnz, // Decrement and jump if non-zero Z8_ei, // Enable interrupts Z8_halt, // Enter HALT mode Z8_inc, // Increment Z8_incw, // Increment word Z8_iret, // Return from interrupt Z8_jp, // Unconditional jump Z8_jpcond, // Conditional jump Z8_jr, // Relative jump Z8_jrcond, // Conditional relative jump Z8_ld, // Load data Z8_ldc, // Load constant Z8_ldci, // Load constant with auto-increment Z8_lde, // Load external data Z8_ldei, // Load external data with auto-increment Z8_nop, // NOP Z8_or, // Logical OR Z8_pop, // Pop Z8_push, // Push Z8_rcf, // Reset carry flag Z8_ret, // Return Z8_rl, // Rotate left Z8_rlc, // Rotate left through carry Z8_rr, // Rotate right Z8_rrc, // Rotate right through carry Z8_sbc, // Subtract with carry Z8_scf, // Set carry flag Z8_sra, // Shift right arithmetic Z8_srp, // Set register pointer Z8_stop, // Enter STOP mode Z8_sub, // Subtract Z8_swap, // Swap nibbles Z8_tm, // Test under mask Z8_tcm, // Test complement under mask Z8_xor, // Logical EXCLUSIVE OR Z8_wdh, // Enable WATCH-DOG in HALT mode Z8_wdt, // Clear WATCH-DOG timer Z8_last }; #endif