Siemens Screenshot
---------------------------------------------
(c) Copyright 2004 by ACiD[mrp]
(p) Published 2004 by GSM Development Crew
    www.gsm-dev.com


   /------------\  /------------\  /---\     /---\
   |            |  |            |  |    |   |    |
   |   /--------/  |    /-------/  |     | |     |
   |   |           |    |_______   |      |      |
   |   |           |            |  |   |\   /|   |
   |   | /------\  |________    |  |   | \./ |   |
   |   | |__    |           |   |  |   |     |   |
   |   |____|   |  /--------/   |  |   |     |   |
   |            |  |            |  |   |     |   |
   |____________/  \____________/  |___|     |___|

           D E V E L O P M E N T  C R E W
               http://www.gsm-dev.com

            (c) 2003, 2004 by ACiD [mrp]

          powered by www.handyhelpline.com
       join us at www.gsm-multifund.de/board
                 (english, german)


With this program it's possible to take an screenshot from Siemens mobiles. 


Supported mobiles:
------------------

tested:
ME45i v4 --> works
S55      --> works
M55      --> works
SL55     --> works

should work with:
C45, S45, ME45, M50, MT50, C55, A60, C60, ...

could work with:
x35, SL42, SL45 

would not work with:
all non Siemens devices like
C30, S40, ST55, ST60

BFB Mode:
---------

You will need an little patch to work with the BFB
mode. It's very easy to write this patch. Have a
look at 'bfb patch.txt' to see if an patch is 
available for your phone and how to write one.
Please make shure not only patch the BFB mode, but 
also the CRC's. If you have not patched the CRC's
some phones will show 'wrong software'.


Baudrate:
---------

Most mobiles needs 57600 Baud to getting into BFB
mode. SL45 and x35 needs 19200 Baud but I had no
time to test it out. So no support for this mobiles
sorry. They are out - dated.


Color Palette:
--------------

In the latest version all color palettes are supported.
Thanks to b@iLLi & Cluni (my SPC2 Coworkers) and 
Terminal2004 for 4096 color palette.


Some more:
----------

- in BFB mode it's not possible to copy screen before
  doing screenshot. If you want to make an faster 
  screenshot and an screenshot from unstable or  
  animated screen you have to use the AT+CGSN Debugger.

- phone have to be on during all operations

- If you want to change COM Port parity, stopbit or databit, add an
  INI entry named:
  AdvancedMode=1
  in section "COM Port".

- please visit my sponsor www.handhelpline.com without him I wouldn't have
  any mobile to test and write software.

- please make shure you are NOT R.G.R.Bergs. If so you are NOT allowed
  to use this program and ANY other gsm-dev programs.

- my very best greetings goes out to:
  RizaPN, SkyLord, SiNgle, mamaich, Chaos, Cluni, exr
  Schiffner, Braindead, b@iLLi, holg, vikado77, gurgy, 
  dr. ON, REDKIN, SL45_6688i, DarkBear, cool_lang, 
  spinkilla, Andi_HUYVU, mic.kan, dspmobile, NIXS, 
  GIROSAVO, MULTIFUND, handy, holg all from 
  gsm-multifund, handyhacking, gsm-city and of course <CB>
