BlueMouse 1.1 (6/13/2007)


Dear User, thank you for downloading Teksoft Bluemouse! 

Below you can find some information regarding this product.



Installing BlueMouse
====================
We have provided three ways of getting the software on your Windows Mobile Device:
1) PC Installer, filename bluemouse_1.1_desktop.exe. This is a Desktop installer. You need to run it on your Desktop 
computer AFTER you have connected the Pocket PC to the Desktop PC via ActiveSync. The process is automated so after 
you've launched this setup exe file, you will get the BlueMouse installed on the PocketPC in a few seconds.
2) Mobile Installer, filename bluemouse_1.1_mobile.exe. This exe file must be copied on your Pocket PC using Active Sync's 
"Explore" option. Then start File Explorer and tap the mobile installer once to launch it. Again this process is automated.
3) CAB Files, filename bluemouse_1.1_cab.zip. This Zip file contains 2 CAB files: teksoft-cer.cab, and 
BlueMouse.signed.arm.cab. You need to copy all these 2 files on your Mobile Device, and from File Explorer to 
launch them in this order: teksoft-cer.cab and the last BlueMouse.signed.arm.cab 


Configuration and Troubleshooting
=================================
After you have installed BlueMouse on your Pocket PC you need to pair the Bluetooth Mouse to the Pocket PC. To learn how to connect the Bluetooth Mouse to your Pocket PC you should consult your Bluetooth Mouse manual or use the following guide:

Step1: On your Bluetooth Mouse, press the connect button.
Step2: On your Pocket PC, Open Bluetooth Devices, and then click Add new device.
Step3: After the device names appear, click the Mouse, and then click Next. 
Step4: When the wizard asks you to specify a passkey, leave the password field blank and press Next. 
If this fails, enter 0000 or 1234 as a passcode and press Next. You can find the exact passcode in your Bluetooth 
Mouse manual. 
Step5: At this step select the Input device service and press Finish. Your mouse light should turn on.
Step6: Go to BlueMouse settings Pannel, and press Start.
 
Troubleshooting:
"Failed to turn Bluetooth on. Please Start Bluetooth before using BlueMouse"
Make sure you are using BlueMouse on a Pocket PC with WM5.0/6.0 and Microsoft Bluetooth Stack.

"Bluetooth Mouse is not configured. Please use Bluetooth control panel to pair to Mouse"
Follow the instruction in this manual to correctly configure BlueMouse.

"Unable to connect to Mouse. Please check if the mouse if paired (or) Try to pair it again."
Re-pair the Mouse (you might need to delete the old configuration - tap and hold and press Delete) or reset your Pocket PC


For more details on how to install, please see:
http://www.teksoftco.com/index.php?section=bluemouse&tab=info


(C)2006-2007

Teksoft Support